| 1 | White | Titanium dioxide (TiO₂) dispersed in a PE carrier | Films, bags, pipe, sheet, and molded parts requiring opacity or whiteness | About 1–5% | TiO₂ concentration, dispersion, opacity target, and outdoor durability |
| 2 | Black | Carbon black dispersed in a PE carrier | Agricultural film, geomembranes, pipes, cable compounds, and general black products | About 1–5% | Carbon black loading and dispersion; outdoor uses may need UV performance testing |
| 3 | Color | Organic or inorganic pigments, or dyes, selected for the target shade | Packaging, household products, containers, film, and injection-molded parts | About 1–5% | Color match, heat stability, lightfastness, migration, and regulatory requirements |
| 4 | UV Stabilizer | UV absorbers and/or hindered amine light stabilizers (HALS) | Agricultural film, outdoor furniture, packaging, and other sun-exposed PE products | About 0.5–3% | Exposure conditions, service life, pigment interactions, and compatibility with other additives |
| 5 | Antioxidant | Commonly hindered phenols and phosphite processing stabilizers | PE processing where melt heat and repeated processing can cause oxidation | About 0.1–1% | Resin grade, processing temperature, residence time, and food-contact requirements |
| 6 | Slip | Fatty acid amides such as erucamide or oleamide | Blown and cast films needing lower surface friction for converting or packaging | About 0.1–1% | Slip development over time, printability, sealing, and interaction with antiblock agents |
| 7 | Antiblock | Mineral particles such as silica or talc | PE film where reduced layer-to-layer sticking is needed for handling and winding | About 0.5–3% | Particle size and dispersion, haze, surface appearance, and film clarity |
| 8 | Antistatic | Antistatic agents, often surfactant-based or polymeric | Packaging and molded products where static charge can attract dust or hinder handling | About 0.5–3% | Required surface resistivity, humidity, migration behavior, and end-use contact rules |
| 9 | Processing Aid | Polymeric processing aids or selected fluoropolymer-based additives, depending on application | Film extrusion and other processes where surface defects or flow behavior need improvement | About 0.1–1% | Process compatibility, equipment conditions, regulatory status, and surface requirements |
| 10 | Filler | Calcium carbonate or another mineral filler in a PE carrier | Film, bags, sheet, and molded products where mineral loading is suitable for the specification | About 5–30% | Filler loading, particle treatment, mechanical-property targets, and processing limits |