| 1. Identify the exact material | Ask whether the package is paperboard, plastic, metal, glass, or a combination, and request the structure of each layer. | OECD reported that packaging represented 40% of global plastic waste in 2019. This figure concerns plastic waste, not all packaging waste. | A material specification listing each component, layer, coating, adhesive, and closure; confirm that it describes the finished package. |
| 2. Verify recycled-content claims | Compare the stated recycled-content percentage and whether it refers to pre-consumer or post-consumer material. | A percentage should have a clearly defined calculation basis and apply to the specified package component—not automatically to the whole package. | A dated supplier declaration, calculation method, and supporting purchase or chain-of-custody records. Check that the claim matches the product specification. |
| 3. Check recyclability in the destination market | Compare the package's material combination, labels, inks, coatings, and detachable parts. | Recyclability depends on both package design and the collection and processing systems available where the product will be sold. | A component-level material breakdown and the test method or market-specific assessment behind any recyclability claim. |
| 4. Compare performance against the product's needs | Assess moisture, oxygen, light, grease, seal, and impact protection as applicable to the contents and shipping conditions. | There is no single barrier or strength value suitable for every product; test requirements should be tied to the intended use and agreed specification. | Relevant test reports stating the method, sample construction, test conditions, units, and acceptance limits. |
| 5. Confirm food-contact compliance where relevant | Check the intended food type, contact conditions, and all materials that may contact food. | Food-contact requirements depend on the market and the package's intended conditions of use. For China, confirm the applicable current GB 4806 requirements for the material and use. | Applicable compliance declarations and test reports for the finished material or article, with the tested material and conditions identified. |
| 6. Examine environmental wording carefully | Question broad terms such as “green,” “eco-friendly,” “biodegradable,” or “compostable” unless the claim is defined and supported. | ISO 14021 addresses self-declared environmental claims; claims should be specific, substantiated, and not misleading. | The precise claim, supporting test or assessment, applicable conditions, and any required disposal or processing conditions. |
| 7. Check the quality of test evidence | Compare whether suppliers provide traceable results for the same material, construction, and test conditions. | ISO/IEC 17025 specifies general requirements for the competence of testing and calibration laboratories. | Full reports with laboratory details, report date, sample identification, methods, results, and accreditation scope where relevant. |