| Polyolefin (POF) | Impulse sealing; L-bar sealing; compatible continuous-seal systems | Often suitable for impulse and L-bar sealers when the machine’s seal length and settings match the bag. Confirm compatibility with the film specification. | Hot-air shrink tunnel or controlled hot-air gun for small-scale use | Check the maximum seal length, seal-bar condition, temperature control, dwell time, and the tunnel’s usable opening. | Commonly used for retail packaging. Film thickness and product shape affect sealing and shrink results. |
| Polyethylene (PE) | Impulse, L-bar, or continuous-band sealing, depending on film thickness and bag format | May require a sealer with sufficient heat output and pressure, especially for thicker films. Verify that the machine is rated for the chosen PE film. | PE-capable shrink tunnel; hot-air systems only where suitable for the product and workflow | Confirm that the sealer can make a consistent seal through the selected film thickness and that the shrink system provides adjustable heat and airflow. | Often selected for heavier or larger packages. Thicker PE generally needs more heat and may shrink differently from thinner films. |
| PVC | Impulse sealing or L-bar sealing; use settings recommended for the specific film | Typically used with sealers designed to handle PVC shrink film. Check seal-bar temperature control and ventilation requirements. | Compatible shrink tunnel or controlled hot-air system specified for PVC film | Check the equipment manual for approved film types, temperature range, ventilation, and safe operating procedures. | PVC can release fumes when overheated. Provide appropriate ventilation and avoid exceeding the film supplier’s processing guidance. |
| Pre-made, open-end shrink bag | Seal the open end after loading; sealing method depends on film and bag dimensions | Suitable when the sealer’s working width accommodates the bag opening and the seal can be positioned consistently. | Tunnel or hot-air system sized for the loaded package | Measure the filled package, not just the empty bag. Check opening width, seal clearance, and conveyor or chamber capacity. | Useful for batch packing, but bag dimensions must allow room for loading and a reliable final seal. |
| Center-fold or lay-flat shrink film made into bags during packing | Often used with L-bar or automatic side-seal systems | Requires equipment that can create the required end or side seals and handle the film width and package rate. | Shrink tunnel matched to the sealing line and package dimensions | Check the machine’s film path, maximum web width, seal configuration, line speed, and tunnel opening. | Confirm whether the equipment is designed for pre-made bags or for forming and sealing film around products. |