| Polypropylene (PP) plastic tub | 8–32 fl oz | Matching snap-on PP lid; some styles use a vented lid | High when the lid and container are designed to fit together securely; test before transporting liquids. | Hot or cold soups, takeout, and reheating when the specific product is labeled for those uses. | Durable and widely used. Microwave suitability and temperature limits depend on the product; follow its instructions. |
| Expanded polystyrene (EPS) foam cup | 8–32 fl oz | Press-on foam lid, usually with a sip or vent opening | Generally good upright with a well-fitted lid; openings and loose fits can allow spills. | Hot soup served for immediate takeout, especially when insulation and low weight are priorities. | Not suitable for microwave use. Foam food-service packaging is restricted or prohibited in some locations. |
| PE-lined paperboard soup cup | 8–32 fl oz | Rolled-rim press-on lid, commonly paperboard or plastic | Good for upright service when the lining is intact and the compatible lid is firmly seated; not designed to be fully leakproof if tipped. | Hot soups, broths, and single-serve takeaway portions. | The polyethylene lining helps resist liquid penetration. Check local disposal rules, since a plastic lining may affect recycling or composting options. |
| PLA-lined paperboard soup cup | 8–32 fl oz | Compatible press-on paperboard or plastic lid | Good upright when properly assembled; lid fit and the cup’s lining determine performance. | Food service where a plant-derived lining is preferred and the cup is used within its stated temperature range. | PLA is not the same as ordinary polyethylene and typically requires suitable industrial composting conditions. Verify hot-fill limits on the product. |
| Aqueous-coated paperboard cup | 8–32 fl oz | Rolled-rim press-on lid matched to the cup diameter | Typically suitable for upright serving; resistance to prolonged contact and spills varies with coating and construction. | Hot or cold takeaway portions when the product is explicitly rated for the intended food and temperature. | “Aqueous-coated” covers different coating formulations. Confirm liquid-holding performance, hot-food suitability, and disposal guidance with the supplier. |
| Molded-fiber or bagasse bowl with barrier lining | 12–32 fl oz | Matching molded-fiber lid or a compatible clear lid | Moderate to high upright when lined and properly lidded; not all fiber bowls are leak-resistant. | Thicker soups, stews, and meal portions where a bowl-shaped container is useful. | Unlined fiber can absorb liquid over time. Check whether the barrier and lid are suitable for hot, oily, or acidic foods. |
| Aluminum foil container | 8–32 fl oz | Crimp-on foil lid or a compatible board/plastic lid | Good upright when the lid is securely crimped or fitted; a non-crimped lid may not prevent leakage if tipped. | Oven-heating applications and takeaway portions that need a rigid container. | Do not use in a microwave. Confirm that the lid is compatible with the container and the intended heating method. |