| 1. Standard uncoated paper | Direct thermal paper, usually without a protective topcoat | General-purpose permanent | Roll or fanfold | Routine parcel shipping and short-term identification | Economical for ordinary handling; print can fade faster with heat, sunlight, friction, or moisture. |
| 2. Top-coated paper | Direct thermal paper with a protective surface coating | General-purpose permanent | Roll or fanfold | Shipping labels exposed to more rubbing or handling | The coating can improve resistance to scuffing and some environmental exposure; it does not make paper fully waterproof. |
| 3. Permanent-adhesive paper | Uncoated or top-coated thermal paper | Permanent, general-purpose formulation | Roll or fanfold | Corrugated cartons and common shipping packaging | Adhesion varies by carton surface, dust, temperature, and application pressure; verify performance on the actual package. |
| 4. Removable-adhesive paper | Direct thermal paper | Removable, lower-tack formulation | Roll or fanfold | Temporary carton identification or applications where clean removal is needed | Not the default choice for parcel labels that must remain attached throughout transit; removability depends on surface and dwell time. |
| 5. High-tack paper | Direct thermal paper, often top-coated | Higher-tack permanent formulation | Roll or fanfold | Rough, textured, or recycled packaging when standard adhesive is insufficient | Test on the intended substrate; a stronger adhesive may be harder to remove and is not suitable for every surface. |
| 6. Cold-temperature paper | Direct thermal paper selected for low-temperature applications | Cold-service adhesive formulation | Roll or fanfold | Packages or goods labeled in chilled environments | Confirm the label’s stated application and service temperature; cold performance depends on both adhesive and surface conditions. |
| 7. Moisture-resistant thermal paper | Thermal paper with a protective coating | Permanent, matched to the intended application | Roll or fanfold | Shipping where occasional splashes or damp handling are possible | Resistance varies by construction; check the product specification rather than assuming the label is waterproof. |
| 8. Synthetic direct thermal film | Heat-sensitive synthetic film, commonly polypropylene-based | Permanent formulation for the intended surface | Roll or fanfold, subject to printer support | Applications needing more tear or moisture resistance than paper | Verify print darkness, media compatibility, and environmental limits; synthetic media is not compatible with every printer. |
| 9. Perforated fanfold paper | Direct thermal paper, coated or uncoated | Usually general-purpose permanent | Stacked fanfold sheets with perforations | Higher-volume printing where roll changes or roll holders are inconvenient | Requires a printer that supports fanfold feeding and enough space behind or below the printer for the stack. |
| 10. Core-size-matched roll paper | Direct thermal paper, with a core and roll diameter chosen for the printer | Usually general-purpose permanent | Roll; core sizes commonly include 1-inch and 3-inch formats | Printers with a specified roll holder or internal media bay | Check the printer manual for maximum roll diameter, core size, label width, and loading orientation before ordering. |